Ultrasound-guided arthrocentesis for condylar head fracture: a technical report.

OBJECTIVES: Double puncture arthrocentesis (DPA) of the temporomandibular joint (TMD) is considered an effective preservative option for managing mandibular condylar head fractures. However, the procedure is commonly performed by a traditional "blind" method using anatomical characteristics. In the present study, an ultrasonography (US) device was applied for the treatment of a case with a fractured mandibular condyle. METHODS: A 79-year-old female was diagnosed right side condylar head fracture complaining pain of right TMD and reduced mouth opening range: inter-incisor distance of 20 mm. Since the fracture position was high and inoperable, the decision was made to perform DPA of the TMD. The US probe was positioned parallel and slightly oblique to the major axis of the mandibular ramus. Both the posterior and anterior insertions into the joint space were performed according to the axis mentioned above, which enabled the operator to visualize the entirety of the needle. RESULTS: The device offered safety and ensured accuracy by providing real-time visual aid to the surgeon. The procedure provided an early increase in the inter-incisor distance (31 mm) and pain relief. CONCLUSIONS: Hence, for the preservative treatment of mandibular condylar head fractures, based on the present study, we recommend US-guided arthrocentesis as a safe, feasible, and effective therapeutic option instead of the conventional "blind" method.

Bone quality assessment in patients with healing mandibular fracture sites: a computed tomography investigation.

The objective of this retrospective study was to assess the bone quality of healing mandibular fracture sites by measuring the Hounsfield units (HU) on computed tomographic (CT) images obtained presurgery and postsurgery in patients treated with rigid internal fixation (RIF). The HU values of healing fracture sites were compared to those of corresponding nonfractured (control) sites on the opposing side and cervical vertebrae sites in the same patients. In total, 31 patients with 45 mandibular fractures treated with RIF underwent presurgical and postsurgical CT examinations. The scans performed after surgery (1, 3, 6, 12, or 18 months) were taken only when there was a need for radiographic evaluation due to a complaint of discomfort from the patient or when the surgeon needed to verify the postsurgical outcome, and each patient underwent only a single postsurgical CT. At the presurgical CT examination, the HU values were lower in the fracture sites than in the control sites. At 3 months postsurgery, the HU values in the fracture sites had increased as the mandibular bone healed. At 6 months postsurgery, the HU values in the fracture sites were higher than those of the control sites. At 12 and 18 months postsurgery, the HU values of both sites were similar. The HU values of the cervical vertebrae remained constant with time. These results suggest that, in patients who have been treated with RIF for mandibular bone fracture, HU values measured by CT vary across time, expressing the physiologic bone healing process.

Detection and classification of mandibular fractures in panoramic radiography using artificial intelligence.

PURPOSE: This study aimed to assess the performance of a deep learning algorithm (YOLOv5) in detecting different mandibular fracture types in panoramic images. METHODS: This study utilized a dataset of panoramic radiographic images with mandibular fractures. The dataset was divided into training, validation, and testing sets, with 60%, 20%, and 20% of the images, respectively. An equal number of control panoramic radiographs, which did not contain any fractures, were also randomly distributed among the three sets. The YOLOv5 deep learning model was trained to detect six fracture types in the mandible based on the anatomical location including symphysis, body, angle, ramus, condylar neck, and condylar head. Performance metrics of accuracy, precision, sensitivity (recall), specificity, dice coefficient (F1 score), and area under the curve (AUC) were calculated for each class. RESULTS: A total of 498 panoramic images containing 673 fractures were collected. The accuracy was highest in detecting body (96.21%) and symphysis (95.87%), and was lowest in angle (90.51%) fractures. The highest and lowest precision values were observed in detecting symphysis (95.45%) and condylar head (63.16%) fractures, respectively. The sensitivity was highest in the body (96.67%) fractures and was lowest in the condylar head (80.00%) and condylar neck (81.25%) fractures. The highest specificity was noted in symphysis (98.96%), body (96.08%), and ramus (96.04%) fractures, respectively. The dice coefficient and AUC were highest in detecting body fractures (0.921 and 0.942, respectively), and were lowest in detecting condylar head fractures (0.706 and .812, respectively). CONCLUSION: The trained algorithm achieved promising performance metrics for the automated detection of most fracture types, with the highest performance observed in detecting body and symphysis fractures. Machine learning can provide a potential tool for assisting clinicians in mandibular fracture diagnosis.

Evaluation of graphene oxide-doped poly-lactic-co-glycolic acid (GO-PLGA) nanofiber absorbable plates and titanium plates for bone stability and healing in mandibular corpus fractures: An experimental study.

BACKGROUND: Open reduction with internal fixation is the preferred treatment option for displaced facial bone fractures. The superior mechanical properties of metallic plates have made them the most widely used material in existing bone fixation systems. However, after the healing period, these permanent plates can cause various problems. Alternative bioresorbable materials are being investigated to reduce these potential problems. This study compares bone stability and viability by using graphene oxide (GO)-doped poly-lactic-co-glycolic acid (PLGA) nanofiber plates and titanium plates for rats with fractured mandibles. MATERIALS AND METHODS: The study included 20 male Sprague-Dawley rats, divided into four groups: a control group (Group I), a mandibular fracture group with no additional application (Group II), a mandibular fracture group repaired with titanium plates (Group III), and a mandibular fracture group repaired with GO-PLGA plates (Group IV). After 2 months, all of the rats were euthanized. A bone compression test was performed to assess bone stability, and a histological examination was performed to evaluate bone healing. RESULTS: The osteocyte lacunae, Haversian ducts, canaliculi, and vascular structures of Group IV were found to be higher. In the compression test, vertical compression was applied to the bone axis, and Group IV had a higher maximum load and maximum stretch. GO-PLGA plates were found to be statistically superior to titanium plates in terms of both bone stability and bone healing (p < 0.05). CONCLUSIONS: The present study found that GO-PLGA plates are more effective than titanium plates for the treatment of mandibular corpus fractures.

Streamlining complex mandibular fracture treatment: Integration of virtual surgical planning and short-segment drilling guides.

This study aimed to evaluate the feasibility and accuracy of a combined virtual surgical planning (VPS) and short-segment drilling guides (SSDGs) workflow for the treatment of complex mandibular fractures. Consecutive patients with complex mandibular fractures underwent treatment using the VPS and SSDGs workflow from August 2020 to April 2022. Various mandibular landmarks were compared between the preoperative virtual surgical plan and postoperative data, including condylar distance (CoD), mandibular angle width (GoL-GoR), GoMeGo angle (∠GoL-Me-GoR), the difference in mandibular angles between the left and right sides (Δ∠Co-Go-Me), and the difference in length between the left and right mandibular body (ΔGo-Me). Additionally, preoperative preparation time and surgical duration were retrospectively analyzed and compared to conventional surgery. All 14 consecutive patients with complex mandibular fractures achieved successful reduction using the VPS and SSDGs workflow. Three-dimensional comparison revealed a mean deviation distance of 0.91 ± 0.50 mm and a root-mean-square deviation of 1.75 ± 0.47 mm between the preoperative designed mandible model and the postoperative mandible model. The percentage of points with deviation distances less than 2 mm, 1 mm, and 0.5 mm between preoperative and postoperative models were 78.47 ± 8.87 %, 60.02 ± 14.28 %, and 38.64 ± 15.48 %, respectively. There were no significant differences observed in CoD, GoL-GoR, ∠GoL-Me-GoR, Δ∠Co-Go-Me, and ΔGo-Me between preoperative virtual surgical planning and postoperative measurements. Furthermore, no significant differences were found in the injury-to-surgery interval, admission-to-surgery interval, and surgical duration between the workflow and conventional surgery. The combined VPS and SSDGs workflow proved to be an accurate and feasible method for treating complex mandibular fractures. It offers advantages such as minimal preoperative preparation time and the ability to precise transfer screw positions of the pre-bent reconstruction plate during surgery. This approach is particularly suitable for managing complex mandibular fractures.

Temporomandibular joint degenerative changes following mandibular fracture: a computed tomography-based study on the role of condylar involvement.

OBJECTIVES: This study assessed the incidence of postfracture radiological temporomandibular joint (TMJ) degeneration in patients with different types of mandibular fractures, focusing on the impact of condylar fractures. METHODS: This retrospective review included patients diagnosed as having mandibular fractures from 2016 to 2020 who had undergone initial computed tomography (CT) and a follow-up CT scan at least 1-month postfracture. Patient demographics, fracture details, treatment methods, and radiological signs of TMJ degeneration on CT were analyzed to identify risk factors for postfracture TMJ degeneration, with a focus on condylar head fracture and non-head (condylar neck or base) fractures. RESULTS: The study included 85 patients (mean age: 38.95 ± 17.64 years). The per-patient analysis indicated that the incidence of new radiologic TMJ degeneration on CT was significantly the highest (p < 0.001) in patients with condylar head fractures (90.91%), followed by those with non-head condylar fractures (57.14%), and those without condylar involvement (24.49%). The per-joint analysis indicated nearly inevitable degeneration (93.94%) in 33 TMJs with ipsilateral condylar head fractures. For the remaining 137 TMJs, multivariate logistic regression revealed that other patterns (ipsilateral non-head, contralateral, or both) of condylar fractures (odds ratio (OR) = 3.811, p = 0.007) and the need for open reduction and internal fixation (OR = 5.804, p = 0.005) significantly increased the risk of TMJ degeneration. CONCLUSIONS: Ipsilateral non-head condylar fractures and contralateral condylar fractures are associated with a high risk of postfracture TMJ degeneration. Indirect trauma plays a vital role in postfracture TMJ degeneration.

"Air Sign" in Misdiagnosed Mandibular Fractures Based on CT and CBCT Evaluation.

BACKGROUND: Diagnostic errors constitute one of the reasons for the improper and often delayed treatment of mandibular fractures. The aim of this study was to present a series of cases involving undiagnosed concomitant secondary fractures in the mandibular body during preoperative diagnostics. Additionally, this study aimed to describe the "air sign" as an indirect indicator of a mandibular body fracture. METHODS: A retrospective analysis of CT/CBCT scans conducted before surgery was performed on patients misdiagnosed with a mandibular body fracture within a one-year period. RESULTS: Among the 75 patients who underwent surgical treatment for mandibular fractures, mandibular body fractures were missed in 3 cases (4%) before surgery. The analysis of CT/CBCT before surgery revealed the presence of an air collection, termed the "air sign", in the soft tissue adjacent to each misdiagnosed fracture of the mandibular body. CONCLUSIONS: The "air sign" in a CT/CBCT scan may serve as an additional indirect indication of a fracture in the mandibular body. Its presence should prompt the surgeon to conduct a more thorough clinical examination of the patient under general anesthesia after completing the ORIF procedure in order to rule-out additional fractures.

Imaging of Maxillofacial Injuries.

This article reviews the system of facial buttresses and discusses the role of diagnostic imaging in the evaluation of the patient with maxillofacial trauma.

Simulating A Subcondylar Mandibular Fracture With Intraoral Open Reduction and Internal Fixation: A Novel Education Tool for Residents.

Study Design: Face and content validation of a surgical simulation model. Objective: Open reduction and internal fixation in displaced subcondylar mandibular fractures is standard care. This requires an extraoral (eg: retromandibular, transparotideal) or intraoral approach. An intraoral approach requires further training since specialized instrumentation such as the 90° screwdriver system and endoscopes might be needed. Currently, no simulation models are available for training residents in intraoral reduction and fixation of subcondylar mandibular fractures. Therefore, we present a validated simulation model for intraoral treatment of subcondylar mandibular fractures. Methods: Based on a computer tomography data set, we designed and printed a 3D model of a mandible with a unilateral subcondylar fracture. To simulate intraoral work depth, it was positioned inside a dental phantom. We tested the model by a group of experts (n = 8), simulating intraoral reduction and fixation of a unilateral subcondylar fracture, using a 90° screwdriver system, a 1.0 subcondylar plate (lambda), and 5-6 mm screws.We assessed Face and Content validity by survey. Results: We provided an open-source printable fracture model. Printing costs were approximately US $10. Experts "Agreed" the model resembling the real scenario and its use for training intraoral reduction and fixation of subcondylar mandibular fractures. Conclusions: We developed a low cost, reproducible, open-source simulator for subcondylar mandibular fractures. Face and Content validity was achieved through evaluation by a group of experts.

Treatment of Post-traumatic Facial Deformities.

Introduction: Skeletal abnormalities in patients with post-traumatic facial deformities can generally be corrected with current craniomaxillofacial techniques. Delay in operative management secondary to associated life-threatening injuries, failure to appreciate the magnitude of the initial facial injury, inadequate operative treatment and operative complications contribute to their occurrence. Systematic evaluation of the midface, including the position of the globes, orbits, zygomatic (facial) width and occlusion, is of paramount importance. Some contour deficiencies can be camouflaged by relatively simple procedures, whereas some deformities may require osteotomies and repositioning of the displaced segments. Staged procedures need to be planned carefully so that previously diagnosed deformities are not concealed and new deformities are not created. The general goals of reconstruction are (i) to restore normal and anatomic bone alignment, (ii) to re-establish the underlying skeletal support prior to addressing soft tissue abnormalities and (iii) to replace missing tissue with like tissues. Conclusion: Restoring the normal bony architecture should be the initial consideration unless the quantity or quality of the soft tissue envelope is inadequate to protect the osseous reconstruction. The purpose of this study is to evaluate post-traumatic facial deformities and simulation and organization of all the treatment modalities in a sequential manner.

Comparative Evaluation of Masticatory Bite Force in Mandible Fractures Treated with Three-Dimensional Curved Locking Strut Plate Versus Straight Locking Miniplate.

Aims and Objectives: To compare the efficacy of titanium 2.0-mm curved locking strut plate and 2.0-mm straight locking miniplate with regard to their intraoperative use and the stability of fixation achieved both, clinically and radiographically. Materials and Methods: Forty patients with 62 sites of mandibular fractures requiring open reduction and internal fixation were included in the study. The sample was divided into two groups of twenty patients each depending upon whether patient received three-dimensional 2.0-mm locking curved strut plate (group A) or 2.0-mm straight locking miniplates (group B). Mouth opening, teeth in the fracture line, degree of displacement, time taken, neurosensory and bite force evaluation were done preoperatively, 1st, 7th day, 2nd week, 4th week, 6th week and 12th week postoperatively. Results: Positive correlation was found between preoperative and postoperative bite force values at subsequent follow-up weeks. At 3rd month evaluation, the change in bite force from the previous follow-up visit was significantly greater in group A (locking strut plate) than group B (locking miniplate) in the incisor, left molar and right molar region. Statistically significant difference was observed between the two groups regarding time taken (P < 0.016) depicting less time taken for placement of three-dimensional 2.0-mm locking curved strut plate(group A) 20.30 ± 4.85 min as compared to 27.30 ± 6.82 min for fixation with 2.0 mm straight locking miniplates in group B. Conclusion: The findings were suggestive that the both systems had better adaptation during fixation, comparable radiographic reduction and increased stability in postoperative period. However, 3D locking strut plate took relatively lesser operative time, offered good rigidity and better stabilization of fractured segments in three dimensions along with significant improvement in the masticatory bite force postoperatively.

Prevalence of Frey syndrome following extraoral surgical treatment for mandibular fractures: a systematic review and meta-analysis.

Our study aims to estimate the prevalence of Frey syndrome following open reduction and internal fixation (ORIF) for mandibular fractures. Two reviewers independently conducted a systematic literature search in the Medline and Scopus databases. The pooled prevalence with 95% confidence intervals (CI) was estimated, and quality assessment, outlier analysis, and influential analysis were performed. In total, fifteen eligible studies were included in this meta-analysis. One study was identified as critically influential. The overall prevalence of Frey syndrome following extraoral surgical treatment for mandibular fractures was estimated as 0.01% (95%CI 0%-0.7%) with moderate heterogeneity observed between studies. In the meta-regression analysis with continuous variables, no statistically significant association was observed. Despite the relatively low prevalence, the impact of Frey syndrome on affected individuals should not be underestimated. Additional research will provide a more comprehensive understanding of the underlying factors contributing to Frey syndrome, leading to improved preventive measures and treatment strategies. A better grasp of the prevalence and associated risk factors will aid in the development of guidelines to minimize the occurrence of this syndrome.

Fratura de mandíbula: análise de 50 casos cirúrgicos em um hospital escola / Jaw fracture: analysis of 50 surgical cases in a teaching hospital

Introdução: A mandíbula é o maior e mais forte dos ossos da face. Em razão de sua topografia, apresenta vulnerabilidade nos traumas. A análise de dados sobre as fraturas de mandíbula se mostram fundamentais para auxiliar no tratamento e em políticas de saúde pública. O objetivo desse estudo é realizar um levantamento epidemiológico de fraturas mandibulares tratadas cirurgicamente. Método: Triagem através do sistema de informação hospitalar, buscando pacientes submetidos a cirurgia para fratura de mandíbula realizadas em um hospital escola pela equipe de cirurgia plástica, em Campinas-SP, de abril de 2015 a abril de 2020. Foram, então, coletados dados por meio da análise de prontuários. Resultados: Foram incluídos 50 pacientes, sendo 90% do sexo masculino. A média de idade foi 30,7 anos. A etiologia predominante foi acidente automotivo e a região mais fraturada na mandíbula foi a parassínfise. A mediana de tempo entre o trauma e cirurgia foi de 19 dias. Onze (22%) pacientes apresentavam alguma comorbidade. Quatorze pacientes (28%) foram internados em Unidade de Terapia Intensiva (UTI) e 42% operaram com outra especialidade além da Cirurgia Plástica. Dez (20%) pacientes apresentaram alguma complicação da cirurgia, sendo a mais comum a deiscência de ferida operatória. Conclusão: Houve predominância entre homens jovens e de acidentes de trânsito como etiologia. As fraturas foram localizadas preferencialmente na região da parassínfise e foram tratadas por meio de fixação interna rígida. Os elevados índices de internação em UTI, lesões associadas e realizações de procedimentos cirúrgicos por outras especialidades evidenciam a gravidade dos pacientes assistidos no serviço.

Introduction: The mandible is the largest and strongest of the bones in the face. Due to its topography, it is vulnerable to trauma. Data analysis on mandible fractures is fundamental for treatment and public health policies. This study aims to conduct an epidemiological survey of surgically treated mandibular fractures. Method: Screening through the hospital information system, seeking patients undergoing surgery for jaw fracture performed at a teaching hospital by the plastic surgery team in Campinas-SP from April 2015 to April 2020. Data were then collected through analysis of medical records. Results: 50 patients were included, 90% male. The average age was 30.7 years. The predominant etiology was an automobile accident, and the most fractured region in the mandible was the parasymphysis. The median time between trauma and surgery was 19 days. Eleven (22%) patients had some comorbidity. Fourteen patients (28%) were admitted to the Intensive Care Unit (ICU), and 42% underwent surgery with another specialty besides Plastic Surgery. Ten (20%) patients had some complication of the surgery, the most common being surgical wound dehiscence. Conclusion: There was a predominance among young men and traffic accidents as etiology. Fractures were preferably located in the parasymphysis region and were treated using rigid internal fixation. The high rates of ICU admission, associated injuries, and surgical procedures carried out by other specialties demonstrate the severity of the patients assisted in the service.

Comparison of hybrid arch bar versus conventional arch bar for temporary maxillomandibular fixation during treatment of jaw fractures: a prospective comparative study.

Objectives: This study aimed to compare the effectiveness of a hybrid arch bar (hAB) with the conventional Erich arch bar (EAB) for the management of jaw fractures, focusing on their use for temporary fixation in patients undergoing open reduction and internal fixation (ORIF). Materials and Methods: Patients presenting with maxillary and mandibular fractures at our institution were included in this prospective, comparative study. Placement time and ease of occlusal reproducibility were recorded intraoperatively for Group A (hAB patients) and Group B (EAB patients). The primary outcome was comparison of the postoperative stability of the two arch bars. Postoperative measurements also included mucosal overgrowth, screw loosening or wire retightening, and replacement rates. The data were tabulated and computed with a P<0.05 considered statistically significant. Results: The study included 41 patients. A statistically significant difference was observed in postoperative stability scores (3) between Group A and Group B (85.0% vs 9.5%, P=0.001). The mean placement time in Group A (23.3 minutes) significantly differed from that in Group B (86.4 minutes) (P<0.001). The ease of intraoperative occlusion was not different between the two groups (P=0.413). Mucosal overgrowth was observed in 75.0% of patients (15 of 20) in Group A. Conclusion: The hAB was superior to EAB in clinical efficiency, maxillomandibular fixation time reduction, stability, versatility, and safety. Despite temporary mucosal overgrowth, the benefits of hAB outweigh the disadvantages. The choice between hAB and EAB should be based on specific clinical requirements.

Incidence neurosensory deficit in mandibular fractures.

Sensory disturbances in the inferior alveolar nerve (IAN) prior to treatment can be attributed to various factors, including the site, type of fracture, and fracture displacement. Therefore, it is of interest to assess the incidence of inferior alveolar nerve injuries associated with mandibular fractures before and after surgical treatment. Group A consisted of patients with inferior alveolar nerve paresthesia before treatment, while Group B consisted of patients with inferior alveolar nerve paresthesia after treatment. A significant difference was observed between the two groups, with a p-value of 0.031 (p <0.05) with the overall incidence of IAN deficit was 57.33% before treatment and 61.33% after treatment. These findings highlight the importance of promptly identifying and managing IAN injuries to minimize long-term consequences.

Diagnosis of split fractures of the mandible in adults.

BACKGROUND: Mandibular split fractures, in which the fracture occurs exclusively in the posterior wall, are uncommon. This study aimed to enhance clinicians' understanding of mandibular split fractures and offer insights for future research. METHODS: This study included six patients who visited our hospital between January 2020 and June 2023 and were diagnosed with mandibular split fractures. We retrospectively collected data from patients' medical records on their age, sex, symptoms, mechanism, impact site, associated injuries, and treatment method, as well as the location, pattern, and number of fractures observed on computed tomography (CT) and panoramic images. The frequency of split fractures among all mandibular fractures was calculated. RESULTS: The six patients included three men (50%) and three women (50%), ranging in age from 20 to 71 years (mean age, 49.8 years). The split fractures were located in the symphysis in one patient (16.7%), symphysis to parasymphysis in two patients (33.3%), parasymphysis in one patient (16.7%), and parasymphysis to the body in two patients (33.3%). Four patients (66.7%) had condylar head fractures, while two patients (33.3%) had single split fractures. The mechanism of trauma was a slip-down incident in four cases (66.7%), while two cases (33.3%) were caused by motorcycle traffic accidents. Four patients (67%) underwent intermaxillary fixation, while two patients (33%) improved with conservative treatment. Split fractures were diagnosed in all six patients on CT, whereas the fracture line was not clearly visible on panoramic images. Mandibular split fractures accounted for 5.6% of all mandibular fractures. CONCLUSION: This study provides insights into the clinical characteristics of rare mandibular split fractures and the diagnostic imaging findings. Furthermore, CT scans and three-dimensional image synthesis-instead of panoramic images-may be essential for accurately diagnosing mandibular fractures, including mandibular split fractures, in the future.

Paediatric Mandibular Fracture Management - A Seven Year Retrospective Study.

Introduction: Mandibular fractures are one of the most frequent and complex types of traumatic injuries of the maxillofacial region in children. Given significant long-term sequelae of inappropriate healing, adequate diagnosis and choice of management, which takes into account the patient's age and fracture characteristics, are paramount. Methods: The data for this study were obtained from the medical records of patients treated in the Department of Surgical Dentistry and Paediatric Maxillofacial Surgery of the Bogomolets National Medical University from 2014 to 2020. Age, gender, fracture pattern and surgical treatment methods performed in these patients were recorded and analysed. Results: A total of 302 children with 376 traumatic fractures of the mandible were managed during the study period. The largest number of fractures was found in the condylar processes region, 42%, and in the body of the mandible, 40%. The majority of patients were males and in the 13-17 age group (147 [49%] cases). Tigerstedt's maxillary-mandibular fixation splint was used in the majority of cases, alone or in the combination with open or internal fixation. Discussion: Whilst the most common type of immobilisation in children in our series was Tigerstedt's maxillary-mandibular fixation splint, its use is limited to the variable bite period. Alternative fixation options are discussed.

The Use of a CAD/CAM Thermoformed Splints System in Closed Reduction of Condylar Fractures.

(1) Background: Mandibular fractures are very common. Common indications of closed treatment for mandibular fractures are non-displaced or minimally displaced simple fractures in adult compliant patients with good dentition, the absence of occlusal disruption, and fractures in growing children. In closed treatment, the mandible is maintained in centric occlusion with a maxillomandibular fixation (MMF) with orthodontic elastics. Many methods of MMF have been described, often using orthodontic appliances. In recent years, CAD-CAM technology has improved many procedures used in maxillofacial surgery and orthodontics. The device we present is manufactured following a digital workflow, and was designed specifically for MMF. (2) Materials: Two patients with mandibular fractures were treated with an MMF method whose procedure comprised scanning of the dental arches, followed by construction of thermoformed splints on which buttons for the elastics and retention holes are made. The splints were fixed on the dental arches with composite resin at the level of the holes, and were kept in place for the period of healing of the fracture, with the intermaxillary elastics hooked to the buttons. (3) Results: The application time of the splints was very quick. The splints remained stable for the necessary time, without causing particular discomfort to the patients. (4) Conclusions: From our experience, this technique has proved to be reliable and reproducible and could represent a valid tool in the closed treatment of mandibular fractures.

Integrative Korean Medicine Treatments for Traumatic Facial Palsy Following Mandibular Fracture: A Case Report and Literature Review.

Prior studies exploring the effectiveness of traditional Korean medicine (TKM) treatment for facial palsy have mainly focused on Bell's palsy, and there are few studies on the effectiveness of TKM treatments for traumatic facial palsy following mandibular fracture. The patient was a 24-year-old Korean man with left-sided facial paralysis following a left mandibular fracture. Surgery was performed for the fracture and the facial palsy was treated using conventional medicine (CM) treatments for approximately 3 months, but there was no improvement observed in the patient's condition. Subsequently, the patient underwent an integrative Korean medicine treatment regimen consisting of acupuncture, pharmacopuncture, cupping, moxibustion, and herbal medication for a duration of 2 months. After 2 months of treatments, the House-Brackmann facial grading scale changed from Ⅴ to II and Yanagihara's unweighted grading score increased from 9 to 34. This case presentation and previous studies of traumatic facial palsy using TKM treatment show that TKM treatment may be considered a complementary or alternative treatment method to CM treatment in patients with traumatic facial palsy. PROSPERO registration number: CRD42023445051.